Chevron noirChevron noir

Business: 5 tips to save energy

Optimize costs & contracts
Budget
Environment

Business: 5 tips to save energy

Mis à jour le

March 4, 2026

4

Min reading

An indispensable commodity for decades, electricity is widely used by businesses. As a result, the cost of energy consumption by these latter is most often considerable.

You're probably constantly looking for ways to make less expenses than revenue. Reducing the electricity consumption of your structure marks a clear path for you to get there. In addition, it will be your contribution to reducing the impact of the energy sector on the climate.

SirEnergies reveals you here 5 solutions to achieve energy savings within your company.

Perform an energy performance diagnosis

Before taking action to reduce your business's electricity consumption, you need to know exactly what you need to fix. So start by submitting your building to an energy performance diagnosis (DPE) if it has been done a long time ago. This operation is used to assess a building's energy consumption and the resulting greenhouse gas emissions.

The DPE has become mandatory since the 1Er July 2021 in certain situations such as renting. This shows how important it is from the point of view of public authorities to achieve the energy transition.

The DPE will allow you to identify the levels at which you must act to reduce the quantity of electricity consumed by your business premises. It can be read through the energy label, which indicates the consumption of primary energy, and the climate label, which indicates the volume of greenhouse gases emitted.

Each label includes 7 classes ranging from A to G, i.e. from the best to the worst performance. The DPE must be carried out by a diagnosticist approved by the COFRAC (French Accreditation Committee). The DPE is accompanied by recommendations that guide the sponsor towards energy efficiency actions. Depending on the results of the diagnosis, the professional may recommend, for example, thermal insulation work.

Strengthen the thermal insulation of the building

To save energy in your business, consider thermal insulation. Over time, any building becomes more permeable to temperature transfers between inside and outside. Reinforcing the insulation of your building may be necessary. You can do it through some work.

Wall insulation from the outside

Insulation from the outside is one of the methods for removing thermal bridges in a building. It consists in putting insulating material on the exterior walls. The related work does not prevent the use of the premises. Wall insulation from the outside can be done with insulating materials made of wood fibers, hemp or flax, polystyrene, vegetable or mineral wool, etc.

Wall insulation from the inside

Wall insulation from the inside is recommended to prevent energy losses in the building without changing its external appearance. It does not require major work. However, the staff will not be able to work peacefully on the premises during the operation. Like the external insulation technique, this can allow you to avoid up to 25% heat loss, according to ADEME (Agency for the Environment and Energy Management).

Other insulation work, such as insulation, can help you reduce your energy consumption.

Optimize heating to save money

The heating system consumes a lot of energy in any building. Consider improving it to make it as energy-efficient as possible. If your premises have a boiler that is at least two decades old, the ideal would be to replace it with a recent model designed to promote energy efficiency.

We recommend a low temperature or condensing heating system. You also have the possibility to change the source of energy to heat your premises. You can thus opt for a large capacity wood pellet boiler, which can supply the entire building.

Opt for low-consumption light bulbs and appliances

The lighting and the various devices used in your professional building occupy a significant part of its energy consumption. Incandescent lamps no longer belong anywhere. Replace them with LED lights which are low-consumption light bulbs that save watts of electricity.

The air conditioner lowers the temperature in a building, but in most cases it causes the energy bill to skyrocket. To save money, it may be useful to replace your air conditioning system with another high performance device. The same goes for other electrical equipment such as the refrigerator.

Enact simple energy-saving actions

To make your company a structure committed to energy efficiency, you need to get staff to share your vision. Employees have a role to play in this sense, especially since they are the ones who use the installations and equipment for the most part. Please make them aware of the need to reduce energy consumption of the company.

Remind them of simple actions to achieve this goal. For example, ask them to turn off the lights when leaving their offices, to use daylight if possible, to turn off the devices when they get home, etc.

To support you in your approach to reducing energy consumption, do not hesitate to call on an energy consulting company such as SirEnergies. We are at your side to answer your questions and advise you if necessary.

To go further, do not hesitate to consult our article to understand” How can an energy broker save you time? ”

Did you know that?

SirEnergies advises you on your current energy contracts to enable you to better manage your energy strategy.
Whether it's your purchases of natural gas and electricity, your energy transition, your energy consumption and your taxes, we offer you a personalized and adapted support to your needs and your consumption profile.
Click below for more information:

Solution Advice

Newsletter hebdomadaire

By Emmanuel Sire, co-founder of Sirenergies

+ 3 500

weekly newsletter subscribers

4.9

The answers to your questions

No items found.